Development of Recycled-Resin Packaging Film That Balances Quality and Environmental Responsibility

Sustainable Packaging Materials

Plastic packaging materials are required not only to protect products and deliver them safely, but also to reduce environmental impact. For packaging materials used in sanitary products in particular, it is important to promote the use of recycled resin while maintaining cleanliness, safety, and consistent quality.

At Kao China Research & Development Center (KCRC), Kao has introduced post-consumer recycled (PCR) resin into liquid detergent containers and rinse-off product containers. In 2025, KCRC also began working on the application of post-industrial recycled (PIR) resin to inner packaging film for sanitary napkins.

When applying recycled resin to packaging film, it is necessary to satisfy three requirements at the same time: safety, quality consistency, and cost. To address this, KCRC established a management system to confirm safety at each stage, including the resin manufacturer, recycled resin, and molded materials. KCRC also set evaluation standards for material performance and optimized the film layer structure to ensure quality equivalent to that of conventional virgin-resin film.

Specifically, KCRC adopted a three-layer structure in which PIR recycled resin is blended into the middle layer. By setting the recycled resin ratio in the middle layer at 55%, KCRC achieved an overall recycled resin ratio of 30% in the film while maintaining surface printability and inner-layer sealing performance. In addition, by evaluating the properties of multiple virgin resins and optimizing their combination with recycled resin, KCRC developed a material design that maintains quality while controlling cost increases.

As a result, the developed film achieved a 28.5% reduction in CO2 emissions while maintaining quality equivalent to that of conventional virgin-resin film. This technology balances reduced environmental impact with the functionality required of packaging materials and expands the possibilities for using recycled resin in sanitary product packaging.

Going forward, Kao will continue research and development of packaging materials with the aim of achieving both decarbonization and resource circulation. Guided by the 4Rs—Reduce, Replace, Reuse, and Recycle—Kao will promote technological innovation in container design, material development, and manufacturing technology, contributing to the realization of a sustainable society.

  • * The packaging technology related to this research received the ECO Package Technology Award at AsiaStar, hosted by the World Packaging Organization (WPO), in January 2026.

Schematic diagram of a three-layer film structure with PIR recycled resin blended into the middle layer. The outer and inner layers are made of virgin resin, while the middle layer contains PIR recycled resin. The recycled resin ratio is 55% in the middle layer and 30% in the overall film. The diagram shows that using recycled resin in the middle layer helps maintain surface printability and inner-layer sealing performance.

Three-layer film structure with recycled resin in the middle layer

Bar chart comparing CO₂ emissions from conventional film and the developed film. The developed film shows lower CO₂ emissions than the conventional film, demonstrating a 28.5% reduction in CO₂ emissions through the use of recycled resin.

CO2 emissions reduction effect

Page Top